home *** CD-ROM | disk | FTP | other *** search
- Path: igate.dmccorp.com!jleslie
- From: jleslie@dmccorp.com (Jerry Leslie)
- Newsgroups: biz.comp.hardware,comp.sys.amiga.hardware,misc.forsale.computer,misc.forsale.computers.other,misc.forsale.computers.pc-clone,misc.forsale.computers.workstation
- Subject: Re: Need info. on digital (DSP3210) 2Gb HD
- Followup-To: biz.comp.hardware,comp.sys.amiga.hardware,misc.forsale.computer,misc.forsale.computers.other,misc.forsale.computers.pc-clone,misc.forsale.computers.workstation
- Date: 8 Jan 1996 20:52:05 GMT
- Organization: Dynamic Matrix Control 713/313-5000
- Message-ID: <4cs05l$ms4@lurch.sccsi.com>
- References: <372.6581T1143T458@mozart.inet.co.th>
- NNTP-Posting-Host: dmccorp.sccsi.com
- X-Newsreader: TIN [version 1.2 PL2]
-
- Suraj Gulrajani (suraj@mozart.inet.co.th) wrote:
- : Sorry for the crossposting, but I am kinda desperate.. :(
-
- : Does anybody have the manual / information sheet for the digital DSP3210
- : 2.1Gb SCSI-2 harddrive (or anything similar??)
-
- : I want to know how to set the SCSI termination(s) jumper(s).. I lost my
- : manual, and am having a lot of trouble with termination.. I have several
- : HDs on the computer...
-
- : Thanks much,
-
- : suraj
-
-
-
- The following article should help.
-
- --Jerry,
-
- Gerald (Jerry) R. Leslie jleslie@dmccorp.com gleslie@isvsrv.enet.dec.com
- Dynamic Matrix Control Corporation (my opinions are my own)
- ==============================================================================
- Newsgroups: comp.sys.dec
- Subject: >> DSP3160s jumper settin
- Message-ID: <5963.286.uupcb@ptonline.com>
- From: paul.knight@ptonline.com (Paul Knight)
- Date: 16 Sep 94 20:36:00 GMT
- Reply-To: paul.knight@ptonline.com (Paul Knight)
- References: <Cw66A8.Ht6@dsbc.icl.co.uk>
- Distribution: world
- Organization: Prime Time On-Line, Alpharetta, GA -- 404-667-3085
- Lines: 51
-
- RS> some theiving person has stolen my dec manuals & I need to
- RS> change the jumpers on my DSP3160S, would anyone be able to
- RS> give me a diagram or something iding what I should be setting
- RS> them to etc etc
-
-
- RS> Any advise greatly appreciated
-
-
- RS> Regards Robert
-
- The DSP Drives are OEM Drives
-
- There should be 10 sets of jumpers together
-
- 10 9 8 7 6 5 4 3 2 1
- |--------------------------------|
- | 1 3 5 7 9 11 13 15 17 19 |
- | 2 4 6 8 10 12 14 16 18 20 |
- |--------------------------------|
- ----------------------------------------------------------------
- ^^^^^^^^^^^^^^
- CIRCUT BOARD
-
- Pins sets 1-2-3 are for the SCSI ID.
- pin pin pin | SCSI
- 1 2 3 | ID
- ------------------------------
- | 0
- x | 1
- x | 2
- x x | 3
- x | 4
- x x | 5
- x x | 6
- x x x | 7
-
-
- Hope This Helps
-
- Paul Knight
- INTERNET: Paul.Knight@ptonline.com
-
- ---
- . SLMR 2.1a .
-
- ----
- *****************************************************************************
- ** Prime Time On-Line Atlanta's Source for FULL INTERNET **
- ** 1200-28.8 404-667-1081 FTP/TELNET/GOPHER 4.0 Gig On-Line **
- *****************************************************************************
-